Plast-O-Matic FC Series PVC Flow For Control Valve 2021 model a Ultra-Pure $80 Plast-O-Matic FC Series PVC Flow Control Valve, For Ultra-Pure a Industrial Scientific Hydraulics, Pneumatics Plumbin Fittings Plast-O-Matic,Valve,,/laryngotome763208.html,$80,FC,For,Control,PVC,Ultra-Pure,hiteknova.com,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Fittings,Flow,a,Series Plast-O-Matic,Valve,,/laryngotome763208.html,$80,FC,For,Control,PVC,Ultra-Pure,hiteknova.com,Industrial Scientific , Hydraulics, Pneumatics Plumbin , Fittings,Flow,a,Series Plast-O-Matic FC Series PVC Flow For Control Valve 2021 model a Ultra-Pure $80 Plast-O-Matic FC Series PVC Flow Control Valve, For Ultra-Pure a Industrial Scientific Hydraulics, Pneumatics Plumbin Fittings

Plast-O-Matic FC Series PVC Flow For Control Valve 2021 model Challenge the lowest price of Japan ☆ a Ultra-Pure

Plast-O-Matic FC Series PVC Flow Control Valve, For Ultra-Pure a

$80

Plast-O-Matic FC Series PVC Flow Control Valve, For Ultra-Pure a

|||

Product description

Size:2 gpm, 3/8 inches NPT Female

Flow Control Valves - Constant flow rate thermoplastic valves for ultra-pure and corrosive liquids. The standard Series "FC" flow controls are constructed of TYPE 1, GRADE 1 PVC (Polyvinyl Chloride) with diaphragms of EPDM. The Series "FC" flow controls are used to maintain a constant pre-determined flow in a system. They must be installed in the correct flow direction (indicated by label) to work properly. They utilize a diaphragm which changes shape with inlet pressure changes, thus maintaining a constant flow rate. They are normally used to replace more costly flow control devices. These flow controls are designed for liquids similar in viscosity to water. All applications should be tested for flow characteristics and chemical compatability to insure desired results. Swelling of the diaphragms in certain liquids will result in loss of flow rate accuracy. An in-line strainer or filter should be installed before the flow control when suspended solids are present, and for all applications below 1.0 GPM (3.8 LPM). The Series "FC" flow controls must have at least 15 PSI (1 Bar) pressure drop across the control in order to deliver the rated flow. Maximum pressure is 120.

Plast-O-Matic FC Series PVC Flow Control Valve, For Ultra-Pure a

  1. At the top left, open the Apple menu.
  2. Select About This Mac.
  3. In the “Overview” tab, look for “Processor” or “Chip”.
  4. Check if it says “Intel” or “Apple”.

Need more help? LEPOWER Metal Desk Lamp, Modern Study Table Lamps, Adjustable Of